Spreaders Chip Spreader L12

Optional Operators Platform - R22 350 + vat Price Excludes Vat and Delivery Contact Graeme Model L12 tow-type chipspreaders (3657mm spreading pattern) - Complete with center hitch, truck hitch, three blanking off plates and a swivel type operator’s handle to engage center hitch to truck hitch. - On the highway, control of both the feed roller and agitator is handled from a single lever on the reversing transmission to simplify the operator’s job. - As an extra aid to ease of operation and metrical-saving efficiency, the transmission automatically shifts to neutral in case of a shifting error. With this set-up the operator has more time to control the feedgate. - Feedgate levers on both sides are designed to open in a true arc. Prevent springing of feedgate and subsequent uneven spreads. - Operator can control opening from as much as 88,9 mm down to 0 mm. - Fast one-man hook-ups without tipping of box are made possible by two balance wheels placed ahead of the traction tyres. - Two self-filling, self-dumping ballast boxes provide additional stability. - Close feed tolerances and fast, accurate feedgate control cuts material waste - means fewer supply trucks needed. - Unusual balance provisions and automatic spring loaded hitch permits operator to detach and hook-up to a truck - A full length operator’s platform 400mm wide, 4000mm long and 800mm high is available as an optional extra. Operation - Ballast boxes at front of spreader maintain balance, self-filling, sliding bottom door permits dumping of ballast on completion of job. - Large 139.7mm dia feedroller grooved with left and right spirals to insure positive feed. - Two balance wheels placed ahead of traction tyres to prevent tipping forward or backward when not attached to truck. - Folding operator’s platform on each end of spreader. - Adjustable feedgate levers mounted both ends of spreader to permit tapered spreads. Feedgate follows a true arc when opening or closing. Does not lift against weight of material in hopper. Eliminates wasteful free flow of material. - Hopper constructed of 4.8mm steel plate. Capacity 1.15m³. - Single shift lever with forward, neutral and reverse positions. Controls agitator and feed roller. - Shifts automatically to neutral in case of shifting error. Technical detail Inside body length 3660mm Hopper capacity 1.15m³ Transmission One ratio for forward / reverse Feed roller 139.7 x 3651.3 Feedgate opening 0 – 88.9mm Width of spreading pattern 3657.6mm Hopper length inside 3657.6mm Spreader height front (ground to belt) 736mm Spreader height front (belt included) 836mm Spreader height rear (ground to top of panel) 876mm Over-all length (including feedgate levers / sprockets) 3810mm Over-all width (including hitch and feedgate levers) 1193.8mm Over-all height (including tyres) 990.6mm Spreader weight Approx 1134kg Spreader hitch Automatic self-coupling drawbar type Truck hitch Fully adjustable Traction tyres 8 x 600 x 9 x 10ply (implement)