Packhouse equipment Tip Scale/Batch weigher – 25kg

Since ancient times weighing has been an often used and much acknowledged way by which the quantity and value of a given material is determined. This principle has not changed and is the same today, merely the way the weighing is carried out is very different due to the technological advances. Batch weighers are based on the continuous batch weighing system according to which the material flows constantly through the weigher at a given capacity. The continuity of the flow is possible without starting and stopping of the auger or elevator, which ensures a high capacity. Weighing is based on the well-known principle of establishing physical balance between the batch weighed out and the weigher setting. This ensures optimum accuracy irrespective of the nature and type of material. Contrary to electronic load cell systems, the principle relies on gravity with no need for external power. All data is either read on a mechanical counter fitted on the weigher or an electronic battery counter. The data can also be transferred by a microswitch to external units of measurement. Manufactured to the highest standards in Denmark – these weighers are made for continuous and industrial use and will outlast any reproductions. The weigher can therefore act as an essential control unit in a complete transport system both in the concern of time and weight quantity These weighers are also known as the KA25 automatic batch weigher For a technical datasheet – click here: SCT – Tipscales